Meniu
MACHINE DETAILS
PARAMETERS(FANUC 0I MF SYSTEM, OTHER CNC CONTROLS OPTIONAL)
| CODE | ITEM | DETAILS | |||||
| 1 | WORKTABLE（WIDTH×LENGTH） | mm | 900×400 | ||||
| 2 | T SLOTS | mm | 3-18 | ||||
| 3 | DISTANCE BETWEEN T SLOTS | mm | 100 | ||||
| 4 | MAX.LOAD BEARING OF WORKTABLE | kg | 350 | ||||
| TRAVEL | |||||||
| 5 | X AXIS | mm | 640 | ||||
| 6 | Y AXIS | mm | 400 | ||||
| 7 | Z AXIS | mm | 500 | ||||
| 8 | DISTANCE FROM COLUM TO SPINDLE CENTER | mm | 476 | ||||
| 9 | DISTANCE FROM TABLE TOP SURFACE TO SPINDLE NOSE | mm | 120-620 | ||||
| SPINDLE | |||||||
| 10 | SPINDLE HOLE TAPER | BT40 | |||||
| 11 | SPINDLE SPEED RANGE | r/min | 20-8000 | ||||
| 12 | THE TRANSMISSIONOF SPINDLE BOX | BELT TYPE | |||||
| 13 | MAIN MOTOR MODEL | βiI6/ 12000 | |||||
| 14 | SERVO MAIN MOTOR RATED POWER | kw | 5.5 | ||||
| 15 | SERVO MAIN MOTOR 30MINS POWER | kw | 7.5 | ||||
| 16 | SERVO MAIN MOTOR RATED OUTPUT TORQUE | Nm | 26.3 | ||||
| 17 | SPINDLE PART DYNAMIC BALANCE TYPE | G1 | |||||
| 18 | SPINDLE ACCURACY | SPINDLE FACE RUNOUT:0.005mm | |||||
| SPINDLE RADIAL RUNOUT :NEAR-END 0.007mm | |||||||
| TOOLS HOLDER SIZE | |||||||
| 19 | TOOLS HOLDER STANDARD | MSA403 BT40 | |||||
| 20 | RIVET STANDARD | MSA403 P40T-1 | |||||
| FEED | |||||||
| 21 | X/Y FEED MOTOR MODEL | βiSC 8/3000 | |||||
| 22 | X/Y FEED MOTOR MAX.SPEED | r/min | 3000 | ||||
| 23 | X/Y FEED MOTOR RATED POWER | kw | 1.2 | ||||
| 24 | X/Y FEED MOTOR RATED OUTPUT TORQUE | Nm | 7 | ||||
| 25 | Z AXIS FEED MOTOR MODEL | βiSC 22B/2000 | |||||
| 26 | Z AXIS FEED MOTOR MAX SPEED | r/min | 2000 | ||||
| 27 | Z FEED MOTOR RATED POWER | kw | 2.5 | ||||
| 28 | Z FEED MOTOR RATED OUTPUT TORQUE | Nm | 20 | ||||
| 29 | X/Y FEED RATE | m/min | 30 | ||||
| 30 | Z FEED RATE | m/min | 24 | ||||
| 31 | CUTTING FEED SPEED | mm/min | 15000 | ||||
| TOOL MAGAZINE | |||||||
| 32 | TOOLS MAGAZINE MODEL | MANIPULATOR | |||||
| 33 | CAPACITY | pcs | 16 | ||||
| 34 | FULL TOOLS MAX TOOL DIAMETER | mm | Ф78 | ||||
| 35 | NEIGHBOR EMPTY TOOL DIAMETER | mm | Ф120 | ||||
| 36 | MAX.TOOLS ALLOWABLE WEIGHT | kg | 8 | ||||
| 37 | MAX.TOOLS ALLOWABLE LENGTH | mm | 220 | ||||
| 38 | TOOL CHANGE TIME | s | 3.5 | ||||
| 39 | TOOL CHANGE WAY | FORWARD/REVERSAL | |||||
| POWER SOURCE | |||||||
| 40 | MACHINE ELECTRIC CAPACITY | KVA | 20 | ||||
| 41 | COOLING PUMP FLOW RATE | L/min | 40 | ||||
| 42 | MACHINE COMPRESSED AIR | kg | 6～8 | ||||
| 43 | POWER REQUIREMENT | 380V±10% 50Hz | |||||
| ENVIRONMENTAL REQUIREMENT | |||||||
| 44 | ENVIRONMENTAL TEMPERATURE REQUIREMENT | 0℃～40℃ | |||||
| 45 | RELATIVE HUMIDITY | 20%～80% | |||||
| MACHINE SIZE | |||||||
| 46 | MACHINE DIMENSION | mm | 2200×2100×2600 | ||||
| 47 | MACHINE WEIGHT | kg | 3700 | ||||
| 48 | MACHINE SHIELD | FULL PROTECT | |||||
| ACCURACY | |||||||
| 49 | X/Y/Z POSITION ACCURACY | mm | ±0.010 | ||||
| 50 | X/Y/Z RE-POSITION ACCURACY | mm | ±0.005 | ||||