Meniu
| ITEM | JHC-12 | JHC-12H |
| JHC-12S | ||
| Standard work rest (dia) | Ø1 ~ Ø25 mm | |
| Special work rest (dia) | Ø25 ~ Ø40 mm | |
| Grinding wheel size (dia. x width x hole) | Ø305 x 150 x Ø120 | |
| Regulating wheel size (dia. x width x hole) | Ø205 x 150 x Ø90 | |
| Grinding wheel speed | 1900 R.P.M | |
| Regulating wheel speed | 20 – 337 R.P.M (7 steps) | 10 – 300 R.P.M variable speed |
| Grinding wheel motor | 7.5 HP | |
| Regulating wheel motor | 1 HP | 1.8 kw Servo Motor |
| Hydraulic pump motor | 1 HP | |
| Coolant pump motor | 1/8 HP | |
| Regulating wheel feed on handwheel | 4 mm (Rev) 0.02 mm (Gra) | |
| Table feed on handwheel | 7 mm (Rev) 0.05 mm (Gra) | |
| Table micro feed on handwheel | 0.2 mm (Rev) 0.001 mm (Gra) | |
| Dressing handwheel | 1.25 mm (Rev) 0.01 mm (Gra) | |
| Regulating wheel tilt angle | +5° ~ -3° | |
| Regulating wheel swivel angle | ±5° | |
| Floor space (L x W x H) | 1800 x 1400 x 1400 mm | |
| Net weight / Gross weight | 1600 kgs / 1750 kgs | |
| Size of case (L x W x H) | 2300 x 1100 x 1800 mm | |
| ITEM | JHC-18 | JHC-18H | JHC-18A | JHC-18AH | JHC-18B | JHC-18BH |
| JHC-18S | JHC-18AS | JHC-18BS | ||||
| Standard work rest (dia.) | Ø1 ~ Ø50 mm | |||||
| Special work rest (dia.) | Ø40 ~ Ø100 mm | |||||
| Grinding wheel size | Ø455 x 205 x Ø228.6 | Ø455 x 255 x Ø228.6 | Ø455 x 305 x Ø228.6 | |||
| (dia. x width x hole) | ||||||
| Regulating wheel size | Ø255 x 205 x Ø111.2 | Ø255 x 255 x Ø111.2 | Ø255 x 305 x Ø111.2 | |||
| (dia. x width x hole) | ||||||
| Grinding wheel speed | 1500 R.P.M | |||||
| Regulating wheel speed | 13-316 R.P.M | 10-250 R.P.M | 13-316 R.P.M | 10-250 R.P.M | 13-316 R.P.M | 10-250 R.P.M |
| (10 steps) | variable speed | (10 steps) | variable speed | (10 steps) | variable speed | |
| Grinding wheel motor | 15 HP | 15 HP | 20 HP | |||
| Regulating wheel motor | 2 HP | 2.9kw Servo Motor | 2 HP | 2.9kw Servo Motor | 3 HP | 4.4kw Servo Motor |
| Hydraulic pump motor | 1 HP | |||||
| Coolant pump motor | 1/4 HP | 1/2 HP | ||||
| Regulating wheel feed on handwheel | 3.5 mm (Rev) 0.05 mm (Gra) | |||||
| Regulating micro feed on handwheel | 0.1 mm (Rev) 0.001 mm (Gra) | |||||
| Table feed on handwheel | 9 mm (Rev) 0.05 mm (Gra) | |||||
| Table micro feed on handwheel | 0.2 mm (Rev) 0.001 mm (Gra) | |||||
| Dressing handwheel | 2 mm (Rev) 0.01 mm (Gra) | |||||
| Regulating wheel tilt angle | +5° ~ -3° | |||||
| Regulating wheel swivel angle | ±5° | |||||
| Floor space (L x W x H) | 2200 x 1300 x 1550 mm | |||||
| Net weight / Gross weight | 2800 kgs / 3100 kgs | 2900 kgs / 3200 kgs | 3000 kgs / 3300 kgs | |||
| Size of case (L x W x H) | 3200 x 2200 x 1900 mm | |||||
| Model | JHC-2408H | JHC-2410H | JHC-2412H |
| Dimensiuni de rectificare cu sprijin standard | Ø2 ~ Ø60 mm | Ø2 ~ Ø60 mm | Ø2 ~ Ø60 mm |
| Dimensiuni de rectificare cu sprijin special | Ø50 ~ Ø150 mm | Ø50 ~ Ø150 mm | Ø50 ~ Ø150 mm |
| Dimensiuni piatra de rectificare (Diam. ext. x Lăţime x diam. int.): |
Ø610 x 205 x Ø304.8 | Ø610 x 255 x Ø304.8 | Ø610 x 305 x Ø304.8 |
| Dimensiuni piatra de antrenare (Diam. ext. x Lăţime x diam. int.): |
Ø305 x 205 x Ø127 | Ø305 x 255 x Ø127 | Ø305 x 305 x Ø127 |
| Turatie piatra de rectificare: | 1050 R.P.M | ||
| Turatie piatra de antrenare: | 10 – 250 R.P.M | ||
| Motor piatra de rectificare: | 25 HP | 30 HP | 30 HP |
| Motor piatra de antrenare: | 2.9KW Servo motor | 4.4KW Servo motor | 4.4KW Servo motor |
| Motor pompa hidraulica: | 1 HP | ||
| Motor pompa lichid racire: | 1/2 HP | ||
| Unghi de înclinare piatra de antrenare | +3° ~ -5° | ||
| Unghi de pivotare piatra de antrenare | ±1° | ||
| Dimensiuni: | 2800 x 1500 x 1650 mm | ||
| Greutate neta / bruta: | 6500 kgs / 7000 kgs | ||
| Dimeniuni colet: | 3000 x 1800 x 1950 mm | ||
| ITEM | JHC-2408T | JHC-2410T | JHC-2412T |
| Standard work rest (dia.) | Ø2 ~ Ø230 mm | ||
| Grinding wheel size (dia. x width x hole) | Ø610 x 205 x Ø304.8 | Ø610 x 255 x Ø304.8 | Ø610 x 305 x Ø304.8 |
| Regulating wheel size (dia. x width x hole) | Ø305 x 205 x Ø127 | Ø305 x 255 x Ø127 | Ø305 x 305 x Ø127 |
| Grinding wheel speed | 1050 R.P.M | ||
| Regulating wheel speed | 10 – 250 R.P.M variable speed | ||
| Grinding wheel motor | 20 HP | 25 HP | 30 HP |
| Regulating wheel motor | 2.9 kw Servo motor | 4.4 kw Servo motor | 4.4 kw Servo motor |
| Hydraulic pump motor | 1 HP | ||
| Coolant pump motor | 1/2 HP | ||
| Regulating wheel feed on handwheel | 2.55 mm (Rev) / 0.01 mm (Gra) | ||
| Regulating micro feed on handwheel | 0.02 mm (Rev) / 0.001 mm (Gra) | ||
| Table feed on handwheel | 2.5 mm (Rev) / 0.01 mm (Gra) | ||
| Table micro feed on handwheel | 0.02 mm (Rev) / 0.001 mm (Gra) | ||
| Dressing handwheel | 2 mm (Rev) / 0.01 mm (Gra) | ||
| Regulating wheel tilt angle | +3° ~ -5° | ||
| Regulating wheel swivel angle | ±1° | ||
| Floor space (L x W x H) | 3100 x 2400 x 1950 mm | ||
| Net weight / Gross weight | 7000 kgs / 7500 kgs | ||
| Size of case (L x W x H) | 3300 x 2200 x 2150 mm (amchine), 2600 x 1400 x 1300 (accessory) | ||