Meniu
|
Model |
DNC-35 | DNC-50 | |
|
Masa de lucru (LxW) |
mm/inch |
600×350 (23.6×13.8) |
700×450 (27.6×17.7) |
|
Rezervorul de lucru (LxWxH) |
mm/inch |
1000x650x100 (39.4×25.6×3.9) |
1160x935x100 (45.7×36.8×3.9) |
|
Cursa axa X |
mm/inch |
400 (15.7) |
650 (25.6) |
|
Cursa axa Y |
mm/inch |
300 (11.8) |
450 (17.7) |
|
Cursa servo ram axa Z1 |
mm/inch |
250 (9.8) |
|
|
Cap de lucru Sparking pe cursa axa W |
mm/inch |
380 (14.9) |
|
|
Greutate maxima piesa |
kgs/lbs |
250 (550) |
300 (660) |
|
Diametrul tevei electrodului |
mm/inch |
ø0.3-ø3.0 (0.020-0.118) |
ø0.3-ø3.0 (0.020-0.118) |
|
Inaltime min/max piesa |
mm/inch |
50-300 (1.9-11.8) |
|
|
Dimensiuni exterioare(LxWxH) |
mm/inch |
1100x1300x2300 (43.3×51.2×90.6) |
1500x1700x2300 (59x67x90.6) |
|
Dimensiuni palet (LxWxH) |
mm/inch |
1870x1450x2230 (73.7×57.1×87.8) |
1,590×1,790×2,230 (62.6×70.5×87.8) |
|
Greutate neta |
kgs/lbs |
1200 (2640) |
1900 (4180) |
Specificatii unitate de generare curent
|
Model |
NC-30A |
|
Curent nominal A |
30 |
|
Putere instalata KVA |
3.5 |
|
Sistem circuit |
Tranzistor de putere MOS |
|
Axe controlate |
X, Y, Z (pozitionare rapida) |
|
Sistem control |
32 bit CPU, 3.5″ floppy disk, hard disk, bucla inchisa,cantare lineare si sistem de alimentare cu codificator |
|
Tip display |
15″ TFT LCD |
|
Sistem de coordonart (Comenzi de pozitionare) |
Absolut / Incremental |
|
Increment minim deplasare (axele X,Y ) mm/inch |
0.001 (0.00004″) |
|
Dimensiuni exterioare mm/inch |
540x800x1700 (21.3×31.5×67) |
|
Dimensiuni palet mm/inch |
790X990X1970 (31.1X39.0X77.6) |
|
Greutate neta kgs/lbs |
200 (440) |